WL-8301C
Product Description
WL-8301C is a modified unsaturated polyester resin. The resin has medium viscosity and medium reactivity, excellent construction performance and mechanical properties.
Application
WL-8301C resin has high solid content and low viscosity, high strength and good wettability. It is mainly suitable for manufacturing high-performance solid surface materials, sanitary ware and other casting products.
Properties
performance | Parameter | unit | standard test |
Exterior | yellow transparent | - | GB/T8237 |
Viscosity 25℃ | 350-500 | mPa.s | GB/T7193 |
Acid value | 15-25 | mgKOH/g | GB/T2895 |
solid content | 67-73 | % | GB/T7193 |
Gel time 25℃ | 4-8 | minutes | GB/T7193 |
Note: 25℃ gel time: add 0.7g Wanglin cobalt and 1.3g Wanglin curing agent to 100g resin.
Liquid Resin Properties (Typical Values)
performance | numerical value | unit | standard test |
Storage period (uninitiated, dark place), 20℃ | 3 | month | - |
Resin cast body properties (typical values)
performance | Parameter | unit | standard test |
Tensile Strength | 60 | MPa | GB/T2567 |
Tensile elastic modulus | 3200 | MPa | GB/T2567 |
Elongation at break | 3.5 | % | GB/T2567 |
Bending strength | 85 | MPa | GB/T2567 |
bending elastic modulus | 3300 | MPa | GB/T2567 |
Impact strength | 9 | KJ/m2 | GB/T2567 |
Heat distortion temperature | 75 | ℃ | GB/T1634 |
Curing conditions: 24 hours at room temperature, 2 hours each at 40°C, 60°C, and 80°C.
Test conditions: temperature 23±2℃, Relative humidity 50±6%
Instructions and attentions
1. WL-8301C resin does not contain an accelerator, and an appropriate amount of accelerator and curing agent must be added according to the operating environment and operating requirements.
2. When using, be sure to control the water content of fillers, pigment paste and other materials, and pay attention to the compatibility of pigment paste and unsaturated polyester resin.
Storage conditions
1. Before use, the resin should be stored in the original packaging (to avoid opening and damaging the barrel) in a dry room below 25°C.
2. The increase in temperature and exposure to light will significantly shorten the storage period. Avoid direct sunlight and keep away from heat sources during storage.
3. Unsaturated polyester resin liquid containing styrene is flammable and should be stored away from open flames.Please refer to the safety data sheet.
All various data are derived from our in-depth research and extensive practice and are therefore completely trustworthy.However, since the production of products is affected by multiple factors, we are not responsible for the actual performance, effects and effects caused by the above data and the specific application and processing of the products, as well as the resulting direct and indirect losses.Before selecting the above products, users are requested to check and confirm the relevant product quality, performance indicators, safety and other data themselves.At the same time, users should also pay attention to avoid infringing various relevant laws, registered trademarks and patent rights.We are not responsible for this.
Version No.:2021/1.0
Publication date:2021/01
Shandong Wanglin New Material Co.,Ltd.
Add:Chemical Industry Park,Economic Development Zone,Ping yuan County,De zhou City, Shandong Province
T:(86)15863477700
E: scott.cui@wl-upr.com
Product Description
WL-8301C is a modified unsaturated polyester resin. The resin has medium viscosity and medium reactivity, excellent construction performance and mechanical properties.
Application
WL-8301C resin has high solid content and low viscosity, high strength and good wettability. It is mainly suitable for manufacturing high-performance solid surface materials, sanitary ware and other casting products.
Properties
performance | Parameter | unit | standard test |
Exterior | yellow transparent | - | GB/T8237 |
Viscosity 25℃ | 350-500 | mPa.s | GB/T7193 |
Acid value | 15-25 | mgKOH/g | GB/T2895 |
solid content | 67-73 | % | GB/T7193 |
Gel time 25℃ | 4-8 | minutes | GB/T7193 |
Note: 25℃ gel time: add 0.7g Wanglin cobalt and 1.3g Wanglin curing agent to 100g resin.
Liquid Resin Properties (Typical Values)
performance | numerical value | unit | standard test |
Storage period (uninitiated, dark place), 20℃ | 3 | month | - |
Resin cast body properties (typical values)
performance | Parameter | unit | standard test |
Tensile Strength | 60 | MPa | GB/T2567 |
Tensile elastic modulus | 3200 | MPa | GB/T2567 |
Elongation at break | 3.5 | % | GB/T2567 |
Bending strength | 85 | MPa | GB/T2567 |
bending elastic modulus | 3300 | MPa | GB/T2567 |
Impact strength | 9 | KJ/m2 | GB/T2567 |
Heat distortion temperature | 75 | ℃ | GB/T1634 |
Curing conditions: 24 hours at room temperature, 2 hours each at 40°C, 60°C, and 80°C.
Test conditions: temperature 23±2℃, Relative humidity 50±6%
Instructions and attentions
1. WL-8301C resin does not contain an accelerator, and an appropriate amount of accelerator and curing agent must be added according to the operating environment and operating requirements.
2. When using, be sure to control the water content of fillers, pigment paste and other materials, and pay attention to the compatibility of pigment paste and unsaturated polyester resin.
Storage conditions
1. Before use, the resin should be stored in the original packaging (to avoid opening and damaging the barrel) in a dry room below 25°C.
2. The increase in temperature and exposure to light will significantly shorten the storage period. Avoid direct sunlight and keep away from heat sources during storage.
3. Unsaturated polyester resin liquid containing styrene is flammable and should be stored away from open flames.Please refer to the safety data sheet.
All various data are derived from our in-depth research and extensive practice and are therefore completely trustworthy.However, since the production of products is affected by multiple factors, we are not responsible for the actual performance, effects and effects caused by the above data and the specific application and processing of the products, as well as the resulting direct and indirect losses.Before selecting the above products, users are requested to check and confirm the relevant product quality, performance indicators, safety and other data themselves.At the same time, users should also pay attention to avoid infringing various relevant laws, registered trademarks and patent rights.We are not responsible for this.
Version No.:2021/1.0
Publication date:2021/01
Shandong Wanglin New Material Co.,Ltd.
Add:Chemical Industry Park,Economic Development Zone,Ping yuan County,De zhou City, Shandong Province
T:(86)15863477700
E: scott.cui@wl-upr.com