 |
| Quantity: | |
|---|---|
product properties
3301 is a bisphenol T-type unsaturated polyester resin, while the resin has high strength, good heat resistance, and wide application.
main application
3301 resin is suitable for handling, winding and other production processes, mainly used in the fields of liners, anti-corrosion and other fields.
Product specifications
performance | range | unit | standard test |
Exterior | Light yellow transparent | - | GB / T8237-2005 |
Viscosity 25 ° C | 400-550 | MPA.s | GB / T7193-2008 |
Acid value | 8-16 | Mgkoh / g | GB / T2895-2008 |
Solid content | 54-60 | ％ | GB / T7193-2008 |
Gel time 25 ° C | 7-15 | minutes | GB / T7193-2008 |
Note: 25 ° C Gel Time: 1.0 g of 1% cobalt and 1.5 g m50 (AKZO-Nobel) were added to 100 g of resin.
Liquid resin performance (typical)
performance | Numerical value | unit | standard test |
Storage period (not triggered, dark), 20 ° C | 3 | month | - |
Resin cast body (typ)
performance | Numerical value | unit | standard test |
Tensile Strength | 75 | MPA | GB / T2567-2008 |
Tension elastic modulus | 3800 | MPA | GB / T2567-2008 |
Fracture extension | 3.0 | % | GB / T2567-2008 |
Bending strength | 125 | MPA | GB / T2567-2008 |
Bending elastic modulus | 3100 | MPA | GB / T2567-2008 |
Impact strength | 8 | KJ / M2 | GB / T2567-2008 |
Heat distortion temperature | 100 | ℃ | GB / T1634-2004 |
Curing conditions: 24 hours, 40 ° C, 60 ° C, 80 ° C, respective
2 hours, 10 hours after 100 ° C
Test conditions: temperature 23 ± 2 ° C, relative humidity 50 ± 6%
Use instructions and precautions
1. 3301 The promoter is not included in the resin, and the appropriate amount of accelerator and curing agent must be added according to the operating environment and operational demand.
2. Be sure to use the water content of the material such as glass fibers, fillers, pigment paste, etc., pay attention to the compatibility of pigment paste and unsaturated polyester resin.
Storage conditions
1. The resin should be stored in a dry chamber below 25 ° C before use before the original packaging (avoiding the damage of the bucket and bucket).
2. Elevation of temperature and light irradiation will significantly reduce storage, and avoid direct sunlight and away from heat.
3. Unsaturated polyester resin liquid containing styrene is flammable, and it is far from the fire. Note See Secure Data Sheet.
All various data are derived from our in-depth research and extensive practice, and thus is completely credible. However, since the production of products is affected by multiple factors, the actual performance, effects and effects of the above data and the specific application and processing of the product are not responsible for the direct and indirect losses. Before selecting the above products, please check the quality, performance indicators, security, and other data of the relevant product quality, performance indicators, security, and other data. At the same time, users should also pay attention to avoid violations of various relevant bills, registered trademarks and patent rights. We are not responsible for this.
Version No.：2021/1.0
Publication date：2021/01
Hubei Wanglin New Material Technology Co.,Ltd.
Add：South of No.3 Xinghua road, Duodao District, JingmenHi-tech Industrial Development Zone
T：(86)15863477700
E: scott.cui@wl-upr.com
product properties
3301 is a bisphenol T-type unsaturated polyester resin, while the resin has high strength, good heat resistance, and wide application.
main application
3301 resin is suitable for handling, winding and other production processes, mainly used in the fields of liners, anti-corrosion and other fields.
Product specifications
performance | range | unit | standard test |
Exterior | Light yellow transparent | - | GB / T8237-2005 |
Viscosity 25 ° C | 400-550 | MPA.s | GB / T7193-2008 |
Acid value | 8-16 | Mgkoh / g | GB / T2895-2008 |
Solid content | 54-60 | ％ | GB / T7193-2008 |
Gel time 25 ° C | 7-15 | minutes | GB / T7193-2008 |
Note: 25 ° C Gel Time: 1.0 g of 1% cobalt and 1.5 g m50 (AKZO-Nobel) were added to 100 g of resin.
Liquid resin performance (typical)
performance | Numerical value | unit | standard test |
Storage period (not triggered, dark), 20 ° C | 3 | month | - |
Resin cast body (typ)
performance | Numerical value | unit | standard test |
Tensile Strength | 75 | MPA | GB / T2567-2008 |
Tension elastic modulus | 3800 | MPA | GB / T2567-2008 |
Fracture extension | 3.0 | % | GB / T2567-2008 |
Bending strength | 125 | MPA | GB / T2567-2008 |
Bending elastic modulus | 3100 | MPA | GB / T2567-2008 |
Impact strength | 8 | KJ / M2 | GB / T2567-2008 |
Heat distortion temperature | 100 | ℃ | GB / T1634-2004 |
Curing conditions: 24 hours, 40 ° C, 60 ° C, 80 ° C, respective
2 hours, 10 hours after 100 ° C
Test conditions: temperature 23 ± 2 ° C, relative humidity 50 ± 6%
Use instructions and precautions
1. 3301 The promoter is not included in the resin, and the appropriate amount of accelerator and curing agent must be added according to the operating environment and operational demand.
2. Be sure to use the water content of the material such as glass fibers, fillers, pigment paste, etc., pay attention to the compatibility of pigment paste and unsaturated polyester resin.
Storage conditions
1. The resin should be stored in a dry chamber below 25 ° C before use before the original packaging (avoiding the damage of the bucket and bucket).
2. Elevation of temperature and light irradiation will significantly reduce storage, and avoid direct sunlight and away from heat.
3. Unsaturated polyester resin liquid containing styrene is flammable, and it is far from the fire. Note See Secure Data Sheet.
All various data are derived from our in-depth research and extensive practice, and thus is completely credible. However, since the production of products is affected by multiple factors, the actual performance, effects and effects of the above data and the specific application and processing of the product are not responsible for the direct and indirect losses. Before selecting the above products, please check the quality, performance indicators, security, and other data of the relevant product quality, performance indicators, security, and other data. At the same time, users should also pay attention to avoid violations of various relevant bills, registered trademarks and patent rights. We are not responsible for this.
Version No.：2021/1.0
Publication date：2021/01
Hubei Wanglin New Material Technology Co.,Ltd.
Add：South of No.3 Xinghua road, Duodao District, JingmenHi-tech Industrial Development Zone
T：(86)15863477700
E: scott.cui@wl-upr.com
